MightyPure™
Residential and Commercial Models
[UV
Water Purifier
Comparison Chart]
Model
GPM
GPH
Inlet
and
Outlet [NPT](1)
Replacement
Lamps
Power
Consumption [Watts]
(2)
Unit Dimensions (in.)
Shipping Data (lb.)
Length
Width
Height
Gross Wt.
Net Wt.
MP13A
2
120
1/2"
05-1400-R
14
13-1/2
4-5/16
8-3/16
9
8
MP16A
3
180
3/4"
05-1098-R
18
19-1/2
4-5/16
8-3/16
10
9
MP22A
6
360
3/4"
05-1097-R
24
22-1/2
4-5/16
8-3/16
13
11
MP36C
12
720
1"
05-1343-R
44
36-1/2
5-11/16
9-1/2
30
25
MP49C
20
1,200
1-1/2"
05-1334-R
54
49-1/2
5-11/16
9-1/2
34
29
CE/RoHS
MP36C
12
720
1"
05-1343-R
44
36-1/2
5-11/16
9-1/2
30
25
(1) All
inlets and outlets are male pipe thread.
(2) Total
power consumption including ballast loss
(approximately).
• Maximum recommended operating
pressure for all purifiers is
100 PSI.
• Pressure drop at maximum
recommended flow rate is less
than 5 PSI.
• All data shown reflects 120 Volt 60 Hz
operation. MightyPure™ units are also
available in 220 Volt 50
Hz, 12 and 24DC.
• MightyPure™ is available for
operation on public power
supplied throughout the world.
• Consult factory with specific
power requirements.
•
These
units are 316 Stainless
Steel, electropolished
and passivated inside
and out
MightyPure™,
Ster-L-Ray™
and Easy-Off™
Retainer Cap are
trademarks of the
Atlantic Ultraviolet
Corp.
Copyright 1995-2007 Atlantic
Ultraviolet Corporation. All rights reserved. The information and recommendations contained in this publication are
based upon data collected by the Atlantic Ultraviolet Corporation and are believed to be correct. However, no guarantee or warranty of any
kind, expressed or implied, is made with respect to the information contained herein. Specifications and information are subject to change without notice.
Adobe Acrobat PDF Library for
